Unless you are in the design company, a drywall saw is not one thing you are most likely to need extremely often, so it’s normal to have concerns about which variety or what model you need to acquire when the need to have arises. There are a lot of makes obtainable, and they arrive in all various measurements.
We have selected 8 diverse makes to evaluation for you. Each model is straightforward to discover and popular to use for slicing drywall. We’ll speak about our experiences reviewing these resources so that you can get an idea of the execs and negatives of every single. We have also integrated a brief buyer’s information exactly where we consider a close appear at the drywall saw to figure out what helps make 1 model greater than the up coming, as nicely as take a look at any specific functions you need to make the job less difficult.
Sign up for us even though we consider an in-depth seem at blade size, take care of comfort, toughness, and a lot more to aid you make an educated buy.
A Quick Look at our Favorites in 2022
| Best Overall
||DEWALT 2-in-1 Folding Drywall Saw||
||Shark 10-2206 Rockeater||
| Best Value
||Stanley 15-206 Jab Saw||
|Goldblatt 6” Drywall Saw||
|Gunpla 6” Pro Drywall Saw (2 pcs.)||
The 8 Best Drywall Saws:
1. DEWALT DWHT20123 Folding Drywall Saw – Best Overall
The DeWalt DWHT20123 Folding Drywall Saw is our choose for the ideal all round drywall observed. This model saw characteristics a mix blade and rasp for far more flexibility than other brand names and equally fold away like a pocket knife, so you need to worry about acquiring holes in your pockets or pants as you do with a straight saw. The blade and rasp have a locking system that locks the blades in location when in the open up and shut position, and the ergonomic handle is comfortable and simple to hold although you perform.
The only downside we seasoned was the locking system was fidgety and did not often lock the blades in place when open up or closed.
To conclude, we believe that this is the best drywall noticed of the calendar year.
- 2-in-1 jab saw and rasp
- Stainless steel
- Ergonomic handle
- Some play in blade
2. Shark 10-2206 Rockeater Drywall Saw
The Shark ten-2206 Rockeater Drywall Sawing Device is our runner up for the best drywall saws. This model features diamond ground teeth rather of stamped teet, which is sharper and a lot more sturdy. The blade employs substantial-top quality carbon steel that is durable and stays sharp longer. It can also minimize on the push and pull movement.
We like this noticed really a little bit whilst we were examining it, and the only factor we could complain about was that the blade is relatively coarse, which can generate jagged cuts and is relatively tough to use in little locations. We chose the top product more than this a single simply because it folds and protects your clothing when not in use, and the enamel make smoother cuts.
- Carbon steel construction
- Diamond-ground teeth
- 2-way cutting
- Thicker blade
- Not the sharpest
3. Stanley 15-206 Jab Saw For Drywall – Best Value
The Stanley 15-206 Jab Saw for Drywall is our pick as the very best drywall noticed for the income. This model attributes a picket handle that is comfy and can give a company grip on the saw whilst you operate. It has a six-inch blade with plenty of sharp enamel that minimize drywall speedily. The idea of the saw functions a self-beginning level that penetrates the drywall with small hard work. We ended up ready to set numerous holes in drywall to set up outlets, and the blade and tip stayed sharp through the occupation.
The draw back we skilled was that the blade would wobble slightly from facet to facet even though we had been generating our cuts. It didn’t harm the cuts, but it did make the saw seem flimsy.
- Wood handle
- 6” saw
- Slick handle
4. Goldblatt 6” Drywall Saw
The Goldblatt 6” Jab Observed is a bi-metallic observed that functions a sharp beveled stage for starting up cuts without creating cracks. Triple ground enamel produce a few slicing surfaces, which leaves a smoother surface when concluded. An ergonomic formed gentle manage offers a comfy grip with lots of leverage.
Unfortunately, we located that the blade dulls very swiftly on this drywall observed and required replacement after only a handful of smaller sized employment.
- Sharp beveled edge
- Triple-ground teeth
- Ergonomic grip
- Blade dulls quickly
5. Gunpla 6” Pro Drywall Saw (2 pcs.)
The Gunpla 6” Pro Jab Noticed is two similar saws in the identical package deal. The blades use manganese metal in their construction and can cut in the two instructions. The enamel on this model can minimize drywall as nicely as other standard-function slicing, like plywood and even PVC.
The draw back to the Gunpla 6” Professional Jab Noticed was that it rusts incredibly speedily even with care taken to defend it from the factors. It was also slow to cut and was very easily 1 of the slowest saws on this list.
- Manganese steel
- General-purpose cutting
- Rusts quickly
- Doesn’t cut well
6. IRWIN Tools Standard Drywall/Jab Saw
The IRWIN Resources Common Drywall/Jab Saw is an exceedingly low-cost drywall saw that you could also use to make cuts in other components like PVC. Every single tooth is bi-ground, which indicates you get two reducing surfaces on each and every tooth. More reducing surfaces enable you to make more rapidly cuts. The well balanced hardwood manage is well balanced and fits easily in your hand.
We lie the IRWIN Tools Common Drywall/Jab Observed as an affordable small occupation tool, but it is very flimsy, and some of the parts become free almost instantly. The blade is also shorter than most of the others on this record, and it wears out speedily and gets to be uninteresting.
- Bi-ground teeth
- Balanced hardwood handle
- Low cost
- Dulls quickly
- Short blade
7. Klein Tools 31737 Drywall Saw
The Klein Resources 31737 Drywall Noticed functions a carbon steel blade that is rust and corrosion-resistant. The triple-floor tooth create 3 chopping surfaces for the smoothest minimize, and a cushioned take care of finish can make commencing new cuts much more comfortable. The blade folds shut, so you don’t poke holes in your pocket and pants, and it aids protect the blade when not in use. The blade also has a mechanism that locks it in the totally open place as well as a virtually completely open up position that will make it easier to make particular cuts.
The downside to the Klein Equipment 31737 Drywall Observed is that it is extremely costly, and you can get numerous other saws for the cost of thione. A second difficulty we observed is that it is possibly hazardous due to the fact the blade snaps closed rapidly, so if your fingers are in the way, you can get reduce. It’s also fairly large and can get unpleasant with prolonged use.
- Carbon steel blade
- Triple ground teeth
- Locks at 125 and 180-degrees
- Folding handle
- Cushioned handle end
- Blade snaps shut
8. WilFiks Razor Sharp 12” Compass Saw
The WilFiks Razor Sharp 12” Compass Observed is one of the greatest saws on this checklist and features a 12-inch blade produced from higher-carbon steel. The blade has seven teeth for each inch, and every tooth is diamond-floor to produce 3 cutting surfaces. The handle is cozy in your hands, especially for extended operate classes, and the pointed tip helps you start off cuts a lot easier.
We enjoyed the additional-prolonged blade while we were examining the WilFiks Razor Sharp 12” Compass Noticed, but what we did not like was that the blade was not extremely sharp out of the box. Even though we ended up capable to sharpen it to get better performance, we know several folks do not have the tools or expertise to sharpen the blade. Also, we reviewed two of these saws, and equally experienced a damaged take care of soon after a handful of jobs owing to the flimsy building.
- 12-inch blade
- Diamond ground
- Anti-slip handle
- Carbon steel blade
- The blade is not very sharp
- Weak handle
Buyer’s Guide – How to CHoose the Best Drywall Saw
Saws meant for cutting drywall are usually referred to as “jab saws,” which describes the motion you are making as you’re plunging into the wall for the very first time, rather of the by the perform they have or the condition of the noticed, which are how most other saws are named.
These aren’t complex tools, so there are two locations that you must pay out a good deal of interest to the blade and the deal with.
It is widespread for a home-owner to want to make a hole it the drywall of a residence to set up an electrical outlet, light-weight fixture, and a lot of other comparable things, and to do that, you are going to require a drywall observed. Let us appear at what helps make one particular noticed much better than the following.
Drywall is generally about ⅜-inch thick, so you do not need a quite long blade to minimize it. However, more time blades cut much faster than a shorter blade because they consider absent more materials with each stroke. The lengthier blade minimizes hand fatigue so you can perform more time, and assists you acquire a lot more leverage although starting a new hole.
Even so, greater blades can grow to be clumsy if they are way too massive and it turns into tougher to make small holes.
- We recommend a 6-inch blade for most applications like cutting holes for light switches or outlets.
- We recommend a 12-inch blade for jobs that require removing large straight sections of drywall only.
- Only get a smaller blade if you need it for a tiny job.
Since you typically need to have to make a hole in an currently standing piece of drywall, your observed needs to have a sharp stage at the stop. You area the tip in opposition to the wall and carefully palm the deal with to make the hole. If the suggestion is not sharp ample, or you use as well a lot force, you can crack the drywall.
Another issue to feel about just before making your obtain is the tooth grind. Several times, you will see a bundle professing the enamel are double or triple floor. What this signifies is that the tooth has numerous reducing surfaces, a double floor tooth ha two, and a triple floor tooth has three.
More cutting surfaces create a smoother minimize more rapidly, and a triple lower blade can take away material up to 50% more quickly than a solitary lower. Multi-lower surfaces also hint at a greater quality building as price range saws stamp out their blades.
Several folks forget about the drywall observed deal with, but it is a essential piece of the instrument. A misshapen deal with is unpleasant and will minimize the time you can perform on a undertaking, as nicely as interfere with tour ability to make accurate cuts. If the deal with is flimsy, it can allow the blade to sway from aspect to facet. It can also crack or crack, rendering the noticed worthless.
Some handle will let you to fold the blade like a pocketknife. This folding characteristic assists defend your clothing whilst carrying the tool, and it can also assist shield the blade enamel although you are not using it. We also located the folding attribute lowers the likelihood of the device teeth rusting.
The DEWALT DWHT20123 Folding Jab Saw/Rasp Combo is our leading pick as the best drywall observed because of to its provided rasp, folding blade, and ergonomic handle. The Shark ten-2206 Rockeater is our runner-up, featuring diamond-ground teeth and a carbon steel body that will very last you a prolonged, long time. It only loses out on first location thanks to a thicker blade and possessing tooth that aren’t sharp enough. The Stanley fifteen-206 Jab Noticed is our select for best value, coming with a wood handle that seems excellent. It will serve as an outstanding product for the rookie or contractor who demands a inexpensive resource.
Hopefully, our evaluations have assisted you understand why some designs increase to the top of our checklist, and why other individuals slide. With this expertise, you must be able to locate the best drywall saw for your needs.
Read through Far more: 8 Very best Drywall Stilts – Testimonials & Top Picks