There’s a reason that sliding doorways are between the most common ways to close off your closet. If your closets don’t have sliding doors but you want to put in them, you have occur to the appropriate area. Sliding doorways can significantly modify the seem of the area, and it is some thing that you can do oneself with a little bit of perseverance. So, just preserve looking through, and we walk you through every little thing that you require to know to set up sliding closet doors!
Tools You’ll Need
The last point that you want is to get halfway through a work only to understand that you really don't everything you want to get it carried out. To help save oneself the disappointment, here are the needed equipment:
- Drill
- Screwdriver
- Tape measure
- Hacksaw
Preparing Your Workspace
Even though receiving all the appropriate equipment is vital, if you really do not properly get ready your workspace prior to you get started, you are setting oneself up for a ton of disappointment and further function.
You need to have to be capable to have a very clear working area around the closet and a very clear path to remove the doorways. You need to also have a different region for components, so you don’t lose anything even though you are doing work.
It does not take significantly perform or time to set up a good perform setting, and the couple of moments of planning can make all the distinction when you get started.
Installing Sliding Closet Doors (7 Steps)
Now that you have all the tools you require and the location geared up, it is time to start setting up the sliding doors. It may well seem like a massive task, but we crack it down action by action for you right here.
1. Remove the Existing Doors
Before you can install the new sliding doorways, you want to take off the present doors! The actual procedure for eliminating the doors depends on the recent doorways in area. Look at the hinges, and take away any screws with possibly a screwdriver or a drill.
When you are taking away the screws, have any person else maintain the door in location so it does not fall above and injury the body or injure you. Once all the screws on the hinges are out, you should be ready to carry and slide the door out of place.
2. Measure the Opening
After the old doorway is off and out of the way, you need to measure the opening. Measure equally the peak and width. You need the two these measurements to get the appropriate-sized door and the proper-sized sliding track.
We hugely suggest taking numerous measurements so you don’t accidentally get the improper sized door or tracks.
3. Get the Correct Closet Door and Tracks
Now that you have the measurements, it’s time to head out and get the proper doorways and tracks. When you’re searching, seem for doorways that are a couple of inches lower than the peak measurement of the opening.
This presents you place for the keep track of, so you can get it in spot right after setting up every little thing. For the monitor alone, you want to try to get it as close as attainable to the width of the door. If it is as well little, you won’t be ready to shut the doorways fully, and if it is large, you will not be in a position to install them at all.
That mentioned, you want to err on the side of also lengthy. You can constantly trim down the surplus with a hacksaw if something does not suit.
4. Install the Top Door Track
Installing the top track is easier than you might consider, but you may need yet another established of arms to get the occupation carried out. Basically place the monitor along the leading of the doorway body. If it is as well long, reduce it down to size with a hacksaw, and do your very best to in shape it as comfortable as feasible in the frame.
To put in it, use a drill to put in screws alongside the openings and screw the keep track of straight into the body. The doorway monitor ought to occur with the acceptable screws, but if they do not, any hardware retailer must have what you need to have.
Just guarantee that they are the proper width and can go at minimum ¾” to 1″ past the keep track of so you get a protected in shape that can withstand the door’s weight.
5. Install the Bottom Door Track
When you have the leading doorway track in area it is time to set up the bottom doorway track. It is the exact same method as the top doorway observe, but you should not need to have any person to hold it in place during set up. Nevertheless, if you are purchasing up the screws your self, guarantee that they are for a longer time than the observe.
There’s a good possibility that you will require to screw through the carpet or other flooring to get a cosy match for the monitor.
6. Install the Doors
After the tracks are in place, it’s time to put in the doors. Commence by putting the first door on the back again runner on the track. Drive the wheels into location, then drop the runner on the bottom keep track of.
Subsequent, do the exact same issue with the entrance doorway, but place it on the front runner on the monitor. This will give you a complete assortment of motion on the doorways and permit you operate them independently.
7. Test the Doors!
Soon after installing the doorways, the only factor that you need to do is double-check out that they’re operating as they must! If so, you’re very good to go and you have effectively mounted sliding doors for your closet!
How Do You Fix a Sliding Closet Door?
Begin by removing the door from the track and inspecting all the diverse factors.
You may possibly need to have to lubricate or change rollers or straighten out the track. With a tiny dedication and grit, there shouldn’t be a problem correcting a slider door. Even so, that doesn’t suggest you won’t need to have any components.
If you uncover a broken component, it’s very best to hit up a regional hardware keep and obtain new parts instead of attempting to make some thing function with a defective component.
How Do I Get My Sliding Door to Slide Easier?
While it depends on why the door is having difficulties to slide, 1 of the easiest things that you can do is spray WD-40 on the rollers. Give it about five minutes to soak in, then the door must slide less complicated.
Nonetheless, double-check out the tracks themselves if you are possessing problems sliding the doors. There could be an obstruction or a bent track, and if that is the case, you are going to want to eliminate the obstruction or mend the observe to get the doorway to slide effortlessly.
Either way, WD-forty is a great way to keep your sliding doorways moving smoothly thirty day period after month and year following 12 months!
Final Thoughts
Even though it may well look a bit overpowering at very first, with the suitable tools, setting up a new sliding doorway for your closet is effortless! Hopefully, studying this manual has offered you the self-confidence that you need to have to get the elements and equipment to do the task and have sliding doors in your property!
Featured Impression Credit score: Jarzabek, Shutterstock
Contents
