WORX Switch Driver Review: Pros, Cons & Verdict

WORX Switch Driver Review: Pros, Cons & Verdict

Editor Score: four./5

Build Quality

Power

Features

Price

Review Summary

The Perform Swap Driver is a wonderful resource for the Do it yourself crowd that presents the user a effective drill with 2 chucks. You can swivel the head for quick entry to the chuck, so you can have a drill bit in 1 and a screwdriver in the other for swiftly drilling and inserting screws in your project with out needing to change bits. This perform can help save you considerable time if you have a huge task like a fence to develop.

Let’s consider a closer search at the execs and cons of this gadget, so you can better choose if it’s correct for you.

Worx Switch Driver – A Quick Look

Pros
  • 2 bits at once
  • Automatic torque control
  • 2 speeds
  • Lithium-ion battery
  • Press button to change chucks
  • LED headlamp
  • Less than 3 pounds
Cons
  • Only accepts hex bits
  • Poor quality charger

Specifications

Company: Positec United states of america

Item Fat: 2.nine pounds

Batteries: one lithium-ion battery

Top: nine inches

Width: 3.five inches

Size: eight.5 inches

Voltage: 20 volts

Wattage: 1,500 watts

Avg Battery existence: 2 hours

Battery Demand Time: 3 – 5 hours

Reduced velocity: – 400 RPM

Large Pace: – one,five hundred RPM

Min Chuck Capability: ¼-inch hex-design

Warranty: three-year manufacturer’s guarantee

Contains: two batteries, three bits

Dual Chuc

Without having a question, the Worx Change Driver’s principal offering point is the practical 2-chuck method. This unique program allows you hold 2 diverse dimension drill bits, or one little bit and a screwdriver idea equipped at all occasions for a rapid changeover amongst them. It’s really common to drill a hole before putting in the screw, and this program tends to make it rapid and easy to do so with just the press of a button.

WORX Switch Driver Review: Pros, Cons & Verdict

Portability

One more important characteristic of the Worx Swap Driver is its portability. Its twenty-volt lithium-ion battery can run for up to two hours on a one demand, which should be sufficient time to full most responsibilities. You can use it wherever without having the require for an electrical outlet or hefty extension wire.

High Powered

Really do not enable the fact that it makes use of batteries direct you to think it’s underpowered. The present day lithium batteries are fairly effective and can match an electric powered drill’s torque as prolonged as it has a very good charge. The created-in torque management instantly senses when the screw is set and stops turning to prevent stripping.

LED Headlamp

The created-in LED headlamp is indispensable when working in low light-weight because it illuminates the surface exactly where you are drilling. It is not as excellent as a flashlight, but it’s far more than enough to stop misplaced holes. The LED part is incredibly resilient and will not burn off out for the life of the instrument.

WORX Switch Driver Review: Pros, Cons & Verdict

Reversible

One more powerful attribute of the Worx Change Driver is that each chucks are reversible, so you can use it as a normal drill but can also reverse it so you can take away screws a lot simpler.

Battery Charger

A single element of the Worx Swap Driver that can use some improvement is the battery charger. As it is, there is no automobile-shutoff to defend the battery. Most chargers shut off when the battery reaches entire cost, but the Worx will keep on charging, which can swiftly wreck the battery.

FAQ

Does the Worx Driver come with a battery and charger?

Sure, a single battery and a charger occur with it.

Does it have a hammer option for drilling masonry?

No, there is no hammer choice on this design.

Does it come with a hard case?

No, there is no hard circumstance provided with the Worx Driver.

WORX Switch Driver Review: Pros, Cons & Verdict

Is the Worx Driver reversible?

Sure, you can use it to insert or get rid of screws.

How do you remove a stuck bit?

Use a pair of channel locks to carefully twist the little bit back again and forth right up until it will come unfastened.

Does it have variable speed?

Indeed, there are two ways to adjust speed. A swap on leading of the resource enables you to select amongst large and minimal velocity. The cause is also variable speed and the chuck will rotate more quickly the more difficult you squeeze it.

What the Users Say

  • Most people enjoy the convenience of the dual chuck.
  • Most people find it lightweight and easy to use.
  • Many people warn about the faulty battery charger.
  • Many people felt it had plenty of power, while a few complained it was too weak.
  • Many people commented on the convenience of the LED headlamp.
  • Several people found the 2-speed switch useful.
  • Some people complained that it only accepts quick release hex bits.
  • A few people consider it an expensive gimmick.

Conclusion

We hope you have appreciated our deep search into the Worx Swap Driver and discovered the solutions to any concerns you may have had. The Worx Switch Driver is a special instrument that can dramatically speed up the process of installing lots of screws. It also presents you the ability to drill distinct sized holes without having shifting the little bit. It’s moveable and extremely lightweight, and you will get lots of use out of each demand. If we have certain you to give it a try out, you should share this Worx Switch Driver on Facebook and Twitter.

Contents