When your basement subfloor is destroyed, it’s comprehensible to be alarmed. The subfloor and foundation are integral to your home’s stability, and you require to have the subfloor replaced when it turns into worn or broken. If your subfloor has commenced to crack, bend, or crack, read on.
We’re going to be truthful here: this type of function can be tough, particularly if you are not experienced at Diy assignments. Most of the labor involved is doable for 1 man or woman, but there is a cause most individuals just choose to get in touch with an experienced contractor. Use your greatest judgment. Now, let us check out how to substitute a bathroom subfloor.
Before You Start
Let us get down to the nitty-gritty. As you may expect, you are going to need some tools and supplies to complete your occupation. As with most development, proper planning is crucial to generating prolonged-lasting and tough function. Let us see precisely what you’ll require to exchange your basement subfloor.
How To Replace a Bathroom Subfloor (5 Steps)
1. Remove Flooring
If your basement has carpet, go around the outer perimeter of the region you are replacing and pull up the edges. You’ll also have to remove the underlay and any nails that ended up securing the carpet to the subfloor. You can go away flooring in locations that you’re not changing.
For tile or linoleum, score about the edges and use a crowbar with a hammer to loosen the flooring. Pull up whatsoever locations you’re replacing beneath, and let’s move on.
2. Remove Subfloor & Joists
This information can make no assumptions about how large an location you want to change, but really feel cost-free to only cut specified locations of the subfloor as required.
Get rid of the screws securing the subfloor to its joists, then use your crowbar to pry up the segment of wooden. If necessary, reduce into the wood with your saw and then consider to get rid of it.
Technically you may not want to exchange the joists, but we’re assuming that they are destroyed as nicely. Hit them with your hammer to eliminate them.
3. Install Joists
Area your 2x4s about 36 inches apart, then secure them to the concrete beneath. Do this by nailing 1 facet of an L-bracket into the wooden, then a concrete screw via the other element into the concrete. For concrete, set your drill in hammer manner. Put L-brackets on the two sides of every single wood piece at every 36-inch segment.
Location braces between the ends of each 2×4 at a 36-inch interval, securing every brace at equally finishes with wood screws. Now that you’ve received your joists set up and braced, it is time for the enjoyable portion.
4. Install The Subfloor
Minimize your plywood sheets with your round noticed to spec, according to what sections you need to change. If you taken off a full sheet, it won’t be as tough simply because you won’t have to make any cuts.
Area the plywood sheet and minimize/file down any stray edges that really don't suit. Up coming, all you need to do is set wood screws by means of each and every joist. It’s vital that you really do not minimize corners right here, otherwise, the balance of your ground is in jeopardy.
5. Finish Flooring
Now that you’ve fixed your basement subfloor, you can really feel cost-free to end the ground nonetheless you’d like. For a much more utilitarian place, bare concrete or tile works, but contemplate adding carpet if you want to use the basement. Laying down carpet goes a long way towards making a basement truly feel like a livable component of the property and not just a bare storm cellar.
Featured Impression Credit score: Levent Konuk, Shutterstock