Staining can be a excellent way to rejuvenate outdated tile, and it also supplies a way to alter the physical appearance of your tile without ripping it all up and beginning once again. If you have tile in your house that you are interested in updating, maintain looking through as we offer you with a stage-by-action information to staining tile quickly and effortlessly. We aid you get established up, inform you what instruments you need to have, and provide plenty of suggestions and methods that you can use to achieve the seem that you want.
Before You Begin
Initial, realize that this venture can consider a prolonged time to complete, so you must established apart at least several hours to comprehensive the job after you start off staining the tile. We also advocate receiving your resources and materials jointly prior to you start so you do not need to end.
Tools and Materials
- Tape measure
- Scrub brush
- Masking tape
- Tile sponge
- Tile stain
- Urethane-based sealer
The 8 Tips & Tricks For Staining Tile
1. Measure the Area
The 1st action is to use a tape evaluate to carefully measure the area that you intend to stain, so you know how considerably stain to obtain. Multiplying the size moments the width will give you the region, and every single can of stain and primer will tell how considerably location that it can go over.
2. Clean the Tile
1 of the most crucial measures in this method is cleaning all the filth and grime off the tile so you can implement the stain evenly and get a uniform color. Use a cloth or scrub brush to take away the contaminants. If the tiles are particularly soiled, you could need to have to use an industrial-energy cleaner to aid you get them as cleanse as possible. Anytime that you use harsh substances, don’t neglect to put on your safety gear.
3. Prepare the Floor
If the tiles that you intend to stain are rough or uneven, you may possibly require to sand the floor to even it out and make it clean. 180–200-grit sandpaper will work effectively and will take away the glow. You can use a hand sander or an electric product, but don’t press also hard, or you might damage the tile or take off as well considerably at once. Often use protective equipment when sanding. When you finish, rinse or mop the area to pick up any dust, and enable it to dry entirely ahead of continuing to the up coming phase.
4. Cover Areas That You Don’t Want to Stain
You can use masking tape to protect the regions of the tile that you really don't want to stain. The masking tape will also help you make clean straight lines that search specialist. Masking tape is straightforward to take away and doesn’t leave a film powering.
5. Add Your Primer
With the tile geared up, you can start off including a primer. Use a manageable-sized brush to apply the primer right to the edge of every tile that you intend to stain. Just take your time for the greatest benefits, and enable the tile to dry until finally it is no for a longer time tacky ahead of relocating on to the up coming action. Constantly dress in a dust mask and rubber gloves, and make certain that there is lots of ventilation when working with primer, stain, or polyurethane. Open home windows and use enthusiasts to press air through the room till you end the venture.
6. Add Your Stain
The greatest way to insert stain to your tile is to use a tile sponge that you can dip into the stain, then wipe it onto the tile. Operate your way to the edge of every tile, as you did with the primer. When you finish, enable it to dry for at minimum 24 hours. If you are producing styles that require you to use far more than 1 shade, function with a single colour at a time, and allow it to dry completely just before starting up the next color. Many folks like to use a paint roller with a short nap to spread the stain when staining floor tile and large wall tile places. You can use that method, but be informed that undertaking so will also stain the grout in between the tiles.
7. Add a Polyurethane Coat
A polyurethane coating can aid safeguard your tiles from the surroundings and will also add a gloss. Tiles with a polyurethane coating are much less most likely to chip and crack. They will also be less complicated to cleanse. As you did with the primer, insert the polyurethane to every tile with a paintbrush. If you want to insert more than one coat, you will need to have to hold out at the very least four several hours ahead of starting up the up coming coat, to permit it to dry.
8. Clean Up
Once the stain and polyurethane levels are dry, all that’s left is cleanup. Meticulously take away any masking tape that you utilized, and wipe down the area of the tile with a clean moist cloth to deliver out the shine.
Tips for Maintaining Your Tiles
- Clean the tiles and the grout between them regularly to prevent dirt from settling in and causing the grout to deteriorate.
- Only use ammonia-free products when cleaning grout.
- Use a broom, vacuum, or soft cloth to remove dust and debris from the tile several times a week.
- When cleaning tiles, don’t oversaturate them with water.
Staining tile is not tough, but it can consider a while to put together the flooring for staining. Waiting around for the primer, stain, and polyurethane to dry can also just take a prolonged time. However, as soon as full, you will have modified your tile’s physical appearance for a fraction of what it would have expense to exchange it. For the ideal benefits, constantly wear your protection products, make sure that there is a lot of ventilation when staining tile, and operate little by little.
Featured Graphic Credit score: faithie, Shutterstock